Product ID:011226 (II), PART A, PLY-TILE 520-A-331 EPOXY(SUPDAT)
MSDS Date:10/31/1992
FSC:8010
NIIN:00N076914
Kit Part:Y
MSDS Number: CDMGJ

M A BRUDER & SONS INC

600 REED RD
BROOMALL, PA 19008
US

Emergency Phone: 215-353-5100

Info Phone: 215-359-3635

Cage: 85519

M A BRUDER & SONS INC

600 BROOMALL, PA 19008 US

Telephone: 610-353-5100;610-359-3635

Cage: 85519

ORGANOPHILIC CLAY

CAS: 12888-68-4

Fraction By Weight: 1-10%

OSHA PEL 15 MG/M3 (MFR)

ACGIH TLV: 10 MG/M3 (MFR)

POLYAMIDE; (POLYAMIDE RESIN)

CAS: 68082-29-1

Fraction By Weight: 11-30%

OSHA PEL N/K

ACGIH TLV: N/K

1.1%.

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 61-99%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM;150 STEL

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:IRRIT OF RESP TRACT. PRLNG INHAL
MAY LEAD TO FATG, DROW, DIZZ &/OR LT HEAD, HDCH, UNCOORD, NAUS,
VOMIT, CNS DEPRESS, ANESTH EFT/NARCOS. SKIN CONT:IRRIT. PRLNG/RPTD
CONT CAN CAUSE DERM, DEFAT. EY E CONT:IRRIT. PRLNG/RPTD CONT CAN
CAUSEBLURRED VISION, REDNESS, TEARING, SEV IRRIT. INGEST:AMTS (EFTS
OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:INGESTED INCIDENTAL TO CONSUMER &
INDUS HNDLG ARE NOT LIKELY TO CAUSE INJURY; HOWEVER, LGR AMTS MAY
CAUSE LUNG INFLAMM & DMG DUE TO ASPIR OF MATL INTO LUNGS.
NOTICE:RPTS HAVE ASSOC RPTD & PRL NG OCCUP OVEREXP TO SOLVS W/PERM
BRAIN & NERV SYS DMG. INTENTIONAL MISUSE BY DELIB CONC & INHAL
CONTENTS MAY BE (SUPDAT)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHAL:REMOVE TO FRESH AIR. RESTORE & SUPPORT CONTINUED
BREATHING. HAVE TRAINED PERSON GIVE OXYGEN IF NECESSARY. GET
EMERGENCY MEDICAL ATTENTION. SKIN:WASH OFF QUICKLY W/PLENTY OF
WATER, THEN SOAP & WA TER; REMOVE & WASH CONTAMINATED CLOTHING
BEFORE REUSE. EYES:FLUSH IMMEDIATELY W/LARGE AMTS OF WATER, ESP
UNDER LIDS, FOR AT LST 15 MINS. OBTAIN EMER MED TREATMENT.
INGEST:OBTAIN MED TREATMENT IMMED.

Flash Point Method:SCC
Flash Point:>62F,>17C
Lower Limits:SEE ING 3
Extinguishing Media:DRY CHEMICAL OR FOAM. AVOID WATER, WHICH REACTS
W/HOT ALUMINUM &/OR ZINC TO GENERATE HYDROGEN GAS & SPREAD FIRE.
Fire Fighting Procedures:USE NIOSH APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . WATER MAY BE USED TO COOL & PROTECT EXPOSED CONTAINERS.
SEE EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:FLAMM LIQ-CLASS IB/IC. CLSD CNTNRS MAY
EXPLODE WHEN EXPOS TO EXTREME HEAT/FIRE. VAPS CAN FORM EXPLO MIXTS
IN AIR AT ELEVATED TEMPS. MAY DECOMP UNDER (SUPP DATA)

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION (FLAME, HOT
SURFACES & ELECTRICAL, STATIC SPARKS). VENTILATE AREA & AVOID
BREATHING VAPORS. CONTAIN & REMOVE W/INERT ABSORBENT MATERIAL USING
NON-SPARKING TOOLS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE IN SUN/>100F. STORE LG
QTYS IN BLDGS DESIGNED FOR STOR OF FLAMM/COMBUST LIQS. DO NOT TAKE
INTERNALLY. KEEP OUT OF REACH OF CHILDREN.
Other Precautions:DO NOT WELD/FLAME CUT W/OUT PROPER VENT TO INSURE
AREA IS FREE OF FLAMM VAPS. DO NOT CUT, PUNCTURE/WELD ON/NEAR
CNTNR. ENTRANCE INTO CLSD STOR TANKS - USE APPROP NIOSH APPRVD
RESP/AIRLINE FOR POSS EXP OS TO SOLV/CHEM FUMES. RAGS/ (SUPDAT)

Respiratory Protection:CONTROL ENVIRONMENTAL CONCENTRATIONS BELOW
APPLICABLE STANDARDS. NIOSH APPROVED CHEMICAL MECHANICAL FILTER
RESPIRATOR DESIGNED TO REMOVE A COMBINATION OF PARTICULATE & VAPORS
(TC23C OR EQUIVALENT).
Ventilation:ALL APPLICATION AREAS SHOULD BE VENTILATED I/A/W OSHA
REGULATION 29 CFR 1910 DURING USE & UNTIL AREA IS FREE OF VAPORS.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS(SUPDAT)
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:WASH HANDS THOROUGHLY BEFORE EATING OR USING
SANITARY FACILITIES.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:ZINC RICH PRIMER. EXPLO HAZ:FIRE CNDTNS
EMITTING IRRIT &/OR TOX GASES. EFTS OF OVEREXP:HARMFUL/FATAL. OTHER
PREC:WASTE CNTNG OIL BASED PAINT/VARNISH THAT PRESENT LG AIR-TO-OIL
INTERFACE WILL OXIDIZE & MAY IGNITE SPONT & SHOULD BE PLACED IN
METAL CNTNR. EYE PROT:& FULL LENGTH FACESHIELD .

Boiling Pt:B.P. Text:>180F,>82C
Vapor Pres:SEE ING 3
Spec Gravity:0.93-2.13
Evaporation Rate & Reference:SLOWER THAN ETHYL ETHER
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:64-85

Stability Indicator/Materials to Avoid:YES
WATER, MINERAL ACIDS, HALOGENATED HYDROCARBONS (INCL FIRE EXTING
AGENTS), STRONG ALKALIS/BASES & OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES. CONTACT W/OXIDIZING
AGENTS.
Hazardous Decomposition Products:HYDROGEN FORMED BY RXN W/WATER,
ALKALIS, SMOKE, ACRID FUMES, CARBON MONOXIDE, CARBON DIOXIDE, ETC.

Waste Disposal Methods:DISPOSE I/A/W LOCAL, STATE & FEDERAL
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.